Llistar TÃtols
S'han trobat 181 Ãtems
Llistant Ãtems des de 75 a 100:
| Format | Data | TÃtol | Autor |
|---|
| Format | Data | TÃtol | Autor |
|---|
|
juliol 2024 |
Evaluation of the chemical risk in drinking water treatment plant. Figueres Drinking Water Treatment Plant |
Carreras i Quintana, Guillem
|
|
|
22 maig 2019 |
Evaluation and comparison of advanced treatment technologies to enhance the removal of pharmaceutical active compounds from wwtp secondary effluent |
Sbardella, Luca
|
|
31 maig 2023 |
Evaluation of a new experimental device for shear modulus measurement |
Berthe, Samuel
|
|
|
31 maig 2023 |
Experimental building block approach and numerical modelling of thermoplastic composite used for fuselage panels |
Zaragkas, Thomas
|
|
|
31 maig 2023 |
Experimental characterization and numerical modeling of damages induced by low-velocity impacts in recent composite materials |
Laurin, Frédéric
|
|
|
31 maig 2023 |
Experimental investigation of the loading rate dependency of the non-linear damageable behaviour of carbon/epoxy laminates |
Berthe, Julien
|
|
|
31 maig 2023 |
Experimental and numerical investigation on bearing behavior of hybrid thin/thick-ply composite laminates |
Loukil, Mohamed Sahbi
|
|
|
31 maig 2023 |
Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading |
Guerrero GarcÃa, José Manuel
|
|
|
31 maig 2023 |
Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading |
Snepsts, Alens
|
|
|
31 maig 2023 |
Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution |
Leciñana Arregui, Iñaki
|
|
|
31 maig 2023 |
Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests |
Carreras, Laura
|
|
7 febrer 2024 |
Flow intermittency patterns, organic carbon dynamics, and cultural ecosystem services in the Mediterranean |
Llanos Paez, Oriana Lucia
|
|
|
4 abril 2024 |
Forming of mechanically interlocked aluminium and carbon fibre reinforced polymer parts with complex geometry |
Latorre Lázaro, Núria
; Casellas, Daniel
; Costa i Balanzat, Josep
; Garcia-Llamas, Eduard
; Pujante, Jaume
|
|
|
31 maig 2023 |
Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures |
Dulieu-Barton, Janice M.
|
|
|
31 maig 2023 |
Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures |
Dulieu-Barton, Janice M.
; Jiménez Fortunato, Irene
; Ruiz Iglesias, Rafael
; Leung, Emily
; Olafsson, Geir
; Thomsen, Ole Thybo
|
|
|
|
Green citites and green urban economy; contributions from case studies for a necessary low-carbon future |
Nuss Girona, Sergi
|
|
|
5 desembre 2014 |
Green citites and green urban economy; contributions from case studies for a necessary low-carbon future |
Nuss Girona, Sergi
|
|
|
|
H2O2-based oxidation processes for the regeneration of activated carbons saturated with volatile organic compounds of different polarity |
Anfruns Bagaria, Alba
; Montes Morán, Miguel A.
; González Olmos, Rafael
; MartÃn, MarÃa José
|
|
|
1 gener 2013 |
H2O2-based oxidation processes for the regeneration of activated carbons saturated with volatile organic compounds of different polarity |
Anfruns Bagaria, Alba
; Montes Morán, Miguel A.
; González Olmos, Rafael
; MartÃn, MarÃa José
|
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
|
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
; Fiedler, Bodo
|
|
|
31 maig 2023 |
Hybridisation of carbon and natural fibers for sustainable composites in automotive applications |
Corvo Alguacil, Marina
|
|
|
31 maig 2023 |
Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation |
Chandarana, Neha
|
|
|
31 maig 2023 |
Implementation of 3d nonlinear material model in finite element code |
Pupure, Liva
|
|
|
20 març 2023 |
Implementation of a high-pressure resin transfer molding (HP-RTM) process to increase the production rate of structural composites and characterization of sustainable vitrimer-matrix high-performance composites |
Builes Cárdenas, Cristian
|
